Engineered and tested to perform, Simpson Strong-Tie hangers are manufactured to the highest quality standards for structural strength and safety. DHUTF top-mount hangers are designed to carry joist floor loads to a wood stud wall over two layers of 5/8-in. gypsum board (drywall). These hangers install after the drywall is in place.
Specifications
Manf Part Number
DHU3.56/18TFX
UPC
663100172642
Condition
New
Weight
4.000000
Features
Available to order skewed up to 45°
Testing verifies that the DHUTF hangers do not reduce the two-hour fire wall assembly rating in either 2x4 or 2x6 walls
DHUTF fire wall hangers are code listed for structural use under ICC-ES ESR-2552
Hangers have been tested according to ASTM E814 and received F (flame) and T (temperature) ratings for use on one or both sides of the wall in Intertek Design No. SST/WPCF 120-01
If hangers are installed on both sides of the wall, then it must be a 2x6 wall
Seat width: 3-9/16 in.
Height: 17-15/16 in.
Made from 12-gauge steel
Skid Count
0
Prop 65 Warning
Warning
This product can expose you to a chemical (or chemicals) that are known to the State of California to cause cancer or reproductive harm. For more information go to www.P65Warnings.ca.gov