The LDT anchor is a high performance concrete anchor that cuts its own threads into concrete.Anchor bodies are made of hardened carbon steel, plated with zinc.The anchors shall have a finished hex washer head with anti-rotation serrations to prevent anchor back-out. The head of the anchor is stamped…
The LDT anchor is a high performance concrete anchor that cuts its own threads into concrete.Anchor bodies are made of hardened carbon steel, plated with zinc.The anchors shall have a finished hex washer head with anti-rotation serrations to prevent anchor back-out. The head of the anchor is stamped with a length identification code for easy inspection.
Specifications
Manf Part Number
LDT-3830
Condition
New
Weight
0.100000
Features
Installs in less than half the time of wedge anchors or adhesive anchors
Simply drill a pilot hole and drive the LDT anchor by hand or impact
No torching or grinding required to remove anchors
Use standard ANSI bits instead of proprietary bits
Single piece design, no nut and washer to assemble
No special proprietary bits to purchase or lose
Reduce chances for anchor failure due to incorrect bit usage
Specifications
Anchor Diameter: 3/8 Inch
Drill Bit Diameter: 5/16 Inch
Effective Length: 3 Inches
Max. Thickness of Material to be Fastened: 1-1/2 Inch
Coating: Zinc Plated
Skid Count
0
Prop 65 Warning
Warning
This product can expose you to a chemical (or chemicals) that are known to the State of California to cause cancer or reproductive harm. For more information go to www.P65Warnings.ca.gov