These 1-1/4", #10 Tile Und erlayment Screws from QuikDrive (CB3BLG114S) are for attaching fiber-cement board to-wood. They have a .375" ribbed wafer head and require a #3 undersized square drive. They have C-3 coating, a mechanical galvanization which provides a protective zinc and tin coating over …
These 1-1/4", #10 Tile Und erlayment Screws from QuikDrive (CB3BLG114S) are for attaching fiber-cement board to-wood. They have a .375" ribbed wafer head and require a #3 undersized square drive. They have C-3 coating, a mechanical galvanization which provides a protective zinc and tin coating over base metal to delay rusting. The coating is applied by mechanically tumbling zinc and tin powder with the base metal and non-metallic impact beads. (Results in less than .1% surface red rust at 1000 hours of ASTM B117 salt spray test.) These screws come in a straight collation and meet the requirements of ANSI 108. Box of 1500.
Specifications
Manf Part Number
CB3BLG114S
UPC
746056066064
Condition
New
Weight
12.400000
Features
Attaches Fiber-Cement Board-to-Wood
#3 Undersized square drive - BIT3SU
Coarse threads
Nibs under the head for easier countersinking
Type 17 point
.375" Ribbed wafer head
C-3 coating, (a mechanical galvanization,) provides a protective zinc and tin coating over base metal to delay rusting
Straight collation
Meet the requirements of ANSI 108
Specifications
Shank Size: 10
Length: 1-1/4 inches
Head Size: .375 inch, Ribbed wafer
Point Type: 17
Coating: C-3 mechanical galvanization
Collation Style: straight collation
Number per Order: 1500
Skid Count
100
Prop 65 Warning
Warning
This product can expose you to a chemical (or chemicals) that are known to the State of California to cause cancer or reproductive harm. For more information go to www.P65Warnings.ca.gov
