The WS6-BP wood screws are self-drilling screws used for numerous framing applications. Upon installation, the washer head should be flat to the surface and the serrations will oppose turning and release the clutch. Do not over-tighten the screws. Installing the screw at an angle may introduce addit…
The WS6-BP wood screws are self-drilling screws used for numerous framing applications. Upon installation, the washer head should be flat to the surface and the serrations will oppose turning and release the clutch. Do not over-tighten the screws. Installing the screw at an angle may introduce additional bending and tension forces into the fastener if the screw head is not flat on the bearing surface. Care should be given to ensure the fastener is installed perpendicular to the plane of the side plate. The USP head stamp identifies screws for easy inspection.
Specifications
Manf Part Number
WS6-BP
UPC
663096402372
Condition
New
Weight
0.010000
Features
Install using low speed clutch drill with 3/8" hex head driver
Not for use with treated lumber
Screw head should be flat on bearing surface
Fastener should be installed perpendicular to the plane of the side plate
Reverse locking serration on bottom of screw to prevent over-tightening against steel plate
Skid Count
0
Prop 65 Warning
Warning
This product can expose you to a chemical (or chemicals) that are known to the State of California to cause cancer or reproductive harm. For more information go to www.P65Warnings.ca.gov