Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer. Anchors are made of of Plated Cardon Steel. or Type 18-8 Stainless Steel. Anchors should be installed with carbide tipped hammer drill bits made in accordance to ANSI B212.15-19…
Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer. Anchors are made of of Plated Cardon Steel. or Type 18-8 Stainless Steel. Anchors should be installed with carbide tipped hammer drill bits made in accordance to ANSI B212.15-1994. Anchors are tested to ASTM E488 criteria.
Specifications
Manf Part Number
HN1240
UPC
662520021202
Condition
New
Weight
5.300000
Features
Anchor diameter equals hole diameter
Available in hex head and six other head styles
Available 1/4-3/4" diameter up to 6-1/4" length
Zinc Plated carbon steel and 304 stainless steel
Provides full 360 degree hole contact over large area and reduces concrete stress
Heavy-loading capacity
Preassembled for faster, easier installations
Dynabolt can be installed through object to be fastened
Sleeve design improves holding power
No pre-spotting of holes necessary
Specifications
Anchor Diameter & Drill Bit Size: 1/2 Inch
Effective Anchor Length: 4 Inch
Bolt Diameter: 3/8 Inches
Threads Per Inch: 16
Minimum Embedment: 1-7/8 Inches
Maximum Thickness of Material to be Fastened: 2-1/8 Inches
Skid Count
0
Prop 65 Warning
Warning
This product can expose you to a chemical (or chemicals) that are known to the State of California to cause cancer or reproductive harm. For more information go to www.P65Warnings.ca.gov
