Metabo HPT DH38YE2M 1-1/2" Spline Shank Rotary Hammer

Metabo HPT
Item#:
683146
Mfr#:
DH38YE2M
Metabo HPT's 1-1/2" Spline Shank Rotary Hammer (DH38YE2) is the next generation in Metabo HPT hammer technology. Compared to its predecessor the DH38YE, the DH38YE2's power is packed into a more ergonomic body that is 2.9 lbs lighter, delivers less vibration and a lower noise level.

Pick Up In Store

or

Delivery

Description

A simple turn of the knob changes the mode from hammer drilling to hammer only, allowing the Metabo HPT Metabo HPT's 1-1/2" Spline Shank Rotary Hammer (DH38YE2) to take on a variety of tasks including; drilling holes in concrete for anchors or rebar, demolishing and chiseling concrete, cutting, digging, tamping or driving ground rods. The 8.4 Amp, 950 Watt motor produces 5.9 ft-lbs of impact energy and delivers fast drilling and chiseling. A dust-proof cover, sealed grease system and auto-stop brushes ensure high motor durability and minimal maintenance. A 360° side handle provides additional control, while the safety clutch shuts down rotation in the event of a bound bit. The DH38YE2 also includes a large injection molded carrying case with ample room for storage of bits, a side handle and other accessories.

Specifications

Manf Part Number DH38YE2M
UPC 663096683146
Condition New
Weight 14.100000
Features
  • Low vibration levels of only 18.8m/s2 (full load) for more comfortable operation in hand
  • Low noise levels of only 95.2 dB (full load) for a less noisy work environment
  • Fast drilling speed for high working efficiency
  • 2-mode action: hammer drilling and hammering only
  • Compact 415 mm in length
Specifications
  • Amperage (A): 8.4
  • Blasts Per Minute - Maximum (BPM): 2800
  • Chuck Capacity: 1.5
  • Chuck Design: Keyless
  • Chuck Size: 1-1/2 in
  • Color / Finish: Silver/Green/Black
  • Cord Length (ft): 8
  • Cordless / Corded: Corded
  • Core Bit Capacity (in): 1.5
  • CSA Certified: Yes
  • Electronic Speed Control: Yes
  • Impact Energy: 5.9
  • Material: Polycarbonate Resin/Steel
  • Maximum RPM: 510
  • MFG Model # (Series): DH38YE2
  • Net Tool Weight (lbs): 14.1
  • Reverse: No
  • Side Handle: Yes
  • Tool Storage: Case
  • Type of Modes: Two modes of operation - hammer only and hammer drilling controlled by the simple turn of a knob
  • UL Listed: Yes
  • Variable Speed: No
Skid Count 60
Prop 65 Warning
Prop 65 Warning Warning

This product can expose you to a chemical (or chemicals) that are known to the State of California to cause cancer or reproductive harm. For more information go to www.P65Warnings.ca.gov