SET-XP® epoxy anchoring adhesive is a high-strength formula for anchoring and doweling in cracked and uncracked concrete and masonry applications. It is a two-part system with the resin and hardener being simultaneously dispensed and mixed through the mixing nozzle. When properly mixed, adhesive will be a uniform teal color for easy post-installation identification.
Specifications
Manf Part Number
SET-XP10
UPC
707392233602
Condition
New
Weight
1.320000
Features
1:1 two-component, high-solids, epoxy-based anchoring adhesive formula
Passed the demanding ICC-ES AC308 adverse-condition tests pertaining to elevated temperatures and long-term sustained loads
Code listed under the IBC/IRC for cracked and uncracked concrete per ICC-ES ESR-2508
Code listed under the IBC/IRC for masonry per IAPMO UES ER-265
Suitable for use under static and seismic loading conditions in cracked and uncracked concrete and masonry
Cure times: 24 hours at 70°F, 72 hours at 50°F
Easy hole-cleaning — no power-brushing required
Suitable for use in dry or water-saturated concrete
8.5 oz. single cartridge
Skid Count
900
Prop 65 Warning
Warning
This product can expose you to a chemical (or chemicals) that are known to the State of California to cause cancer or reproductive harm. For more information go to www.P65Warnings.ca.gov