The Wedge-All wedge-style expansion anchor is intended for use in solid concrete or grout-filled masonry. This anchor is best suited in installations where a building code approval for seismic and cracked/uncracked concrete is not required. Threaded studs are set by tightening the nut to the specifi…
The Wedge-All wedge-style expansion anchor is intended for use in solid concrete or grout-filled masonry. This anchor is best suited in installations where a building code approval for seismic and cracked/uncracked concrete is not required. Threaded studs are set by tightening the nut to the specified torque.
Specifications
Manf Part Number
WA37312
UPC
44315084409
Condition
New
Weight
0.120000
Features
A non-bottom bearing, wedge style expansion anchor for use in solid concrete or grout filled masonry
Threaded stud version is available in nine diameters and multiple lengths
One-piece clip ensures uniform holding capacity that increases as tension is applied
Threaded end is chamfered for ease of starting nut
One piece wrap around clip
Most sizes feature full thread for added versatility
Specifications
Standards Met
Anchor: A-A-1923A
Nut: ASTM A 563, Grade A
Zinc Plating: ASTM B 633, Service Condition SC1, Type III
General Specifications
Material: Zinc Plated Carbon Steel
Minimum Tensile Strength (Stud): 70,000 psi
Size: 3/8" x 3-1/2"
Drill Bit Dia.: 3/8"
Anchors per Box: 50
Skid Count
24500
Prop 65 Warning
Warning
This product can expose you to a chemical (or chemicals) that are known to the State of California to cause cancer or reproductive harm. For more information go to www.P65Warnings.ca.gov