This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions. A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding. The requirements on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.
Specifications
Manf Part Number
LU90M012
UPC
8925301851
Condition
New
Weight
1.000000
Features
Positive Hook Angles produce a smoother cut with less material distortion and burr free cuts
Freud Made TiCo Carbide designed to cut non-ferrous metals - extends tooth life and withstands impact
Specifications
Coating: Perma-SHIELD
Plate: .098 Inches
Skid Count
0
Prop 65 Warning
Warning
This product can expose you to a chemical (or chemicals) that are known to the State of California to cause cancer or reproductive harm. For more information go to www.P65Warnings.ca.gov